|
CB9320-258TV Super Duty Wide Screen
Television Swivel and Pull-Out |
The Accuride CB9320-258TV is a 22" full extension super heavy duty TV swivel and pull out. Recommended for wide screen televisions up to 65" wide.
The maximum recommended load weight is 325 pounds. It has smooth gliding, stable movements. The steel ball bearing slides are silenced for quiet operation. It has a hold-in detent to prevent platform roll-out and bounce-back. The unit comes in black only. The mounting height required is 4.18" +/- .06". A 3/4" thick plywood board can be mounted to the plate for huge televisions if desired but generally will not be required.
Be certain that your cabinet interior height can accommodate 4.25" + the thickness of your 'optional' platform, and then the height of your TV.
Mounting hardware and instructions are included. Swivel rotates 30 degrees maximum to the left or right at any distance pulled out, or even in its retracted position.
Plate measures 35-1/2" wide" x 22" deep.
Please note:
when the swivel is extended with a television set upon it, it is recommended to have your entertainment center or armoire secured to your wall or floor to prevent accidental tip over. Bolt through mounting is advised for the slide track. Can be used on countertops also. Additionally, this unit can be used for audio/visual equipment or home theater cabinets designed for wide screen or heavy TV's.
|
Why the Accuride TV swivel versus others? We are commonly asked this.
- The Accuride TV swivel and pull out has STEEL ball bearing slides, not nylon ball bearing or nylon roller slides.
- Its swivel platform swivels on FOUR wide swivel rollers, not just a center pivot post.
- It has FULL LENGTH steel L-bracket mounting along each slide member.
- It is a super heavy duty mechanism made of top quality materials!
|
|
Part number: ACC-CB9320-258TV (Accuride part number is CB9320-258TV)
Price: $669.11 
We set up this TV swivel and pull out as a direct ship. The unit itself weighs 74# when packaged. Our vendor keeps stock on hand
and orders generally will ship in 1 to 2 days. The freight charge for shipping will range between $34 to $65 (continental US ground
shipping). The freight depends upon your distance from Indiana, your zip code and whether the TV swivel is shipping to a
residential or commercial address. This freight quotation is for the continental US ground shipping, generally 1 to 5 day travel
depending upon your location. We can set up shipments to Alaska, Hawaii, and Canada and the freight charge will be higher. (freight estimates as of Sept. 2006)
We advise against sending the unit via 2nd day air or next day air, freight would be in excess of $200 for 2nd day and we do not
want to quote next day air. This TV swivel is NOT available for International shipments other than shipping to Canada. International shipping off the North American continent would be extremely expensive.
If you are in need of this TV swivel and pull out urgently, please call in your order. Be certain to state the CB9320 model number.
If early enough in the day, we will try to arrange to have it shipped that same day, otherwise it should ship the next business day. Our customer service line: 813-633-7544.
IF YOU NEED A SMALLER TV SWIVEL, PLEASE SEE THE CB3620-258TV SWIVEL BY CLICKING THIS LINK. Ordering information page or
go direct to the on-line ordering form if you are ready to order. Bookmark this page for your future reference.
To view the actual installation instructions for the CB9320-258TV wide screen heavy duty TV swivel and pull out, please click this file link to download an Adobe Acrobat PDF file: TV9320 instructions PDF file 460 KB |
Several color illustrations will load below. These photos are meant to show you different views of the swivel.
|
Close up of the front left side showing the slide mechanism and the plate thickness. Slides have full length L-bracket attachments for heavy duty support.
 |
Close up of the ball bearing slides and full length L-bracket. 22" full extension telescoping slides. Swivel is tilted on its end in this photo so you can view the bottom too. Ignore the strap
around the side, that is just for packaging purposes. Customer will remove the protective straping.
 |
Picture of the mounting hardware that comes with the swivel.
|
Underside of swivel showing the four wheels that the swivel plate rotates upon. Swivel action does not burden the single pivot point. The four roller wheels add support and lend to the quiet
action of the swivel. The side wheels are the hold-in detent. L-brackets have a series of round and oval holes for mounting strength and adjustment.
|
Close up of one of the four roller wheels.
|
The TV swivel is packaged in heavy duty cardboard, double wall on the ends, and a Styrofoam insert is set in place to protect the bottom wheels and mechanism. Top of the swivel rests flat in
the bottom of the box with a plastic sheet to prevent scratching.
|
Close up of the hold in detent. Packing strap is just for protection in shipping. You will remove it.
|
Swivel will rotate up to 30 degrees to the left or right. It extends 22" out of your cabinet or built in.
|
To view the actual installation instructions
for the CB9320-258TV wide screen heavy duty TV swivel and pull out, please click this file link to download an Adobe Acrobat PDF file: TV9320 instructions PDF file 460 KB
|
